首頁 > 產品介紹

2023-06-20

產品介紹 | 洩爆扣件（FM認證）及牽引絞索 、洩爆牆

  • 洩爆扣件（FM認證）及牽引鉸索

    洩爆螺釘及牽引鉸索的設計目的是通過計算抗風壓值，將內部爆炸壓力釋放到外部。在設定的爆炸壓力值的條件下，可以保護建築物的牆壁或屋頂。配合牽引鉸索使用，能防止釋放壓力時牆面或屋面板脫落，傷害人員的生命安全。

    Explosion-venting Fasteners （FM Approved） and Traction Rope

    The design purpose of the explosion-venting fasteners and the traction rope is to release the internal explosion pressure to the outside by calculating the wind resistance value. Under the condition of set explosion pressure value, it can protect the wall or roof of the building. It is used as a supporting traction rope to prevent the wall or roof panel from falling off and endangering the safety of personnel when the pressure is released.

  • 洩爆牆

    當建築物室內發生爆炸時，屋內壓力隨之急遽上升，FM認證金屬板通過FM認證洩爆螺釘及牽引鉸索使牆體開啟並釋放壓力以控制的產生或使破壞程度達到最小。

    Explosion Venting Wall

    When an explosion occurs in the building, the pressure in the room rises sharply, and the FM Approved steel panel opens the wall and releases the pressure through the FM Approved explosion-venting screw and the traction rope to control the explosion or minimize the damage.
  • 1
    •  
  • 2
    •  
  • 3
    •  
TOP